• 0

Project Consultancy, Reports & Profiles

Best Business Opportunities in Meghalaya - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

 

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


TOURISM

 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.

INDUSTRIAL SECTOR

The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


OBJECTIVE OF THE POLICY

•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.

SALIENT FEATURES OF THE INDUSTRIAL POLICY

•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


INDUSTRIES IDENTIFIED AS THRUST AREAS

                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology

INCENTIVES FOR LARGE AND MEDIUM SCALE INDUSTRIES

•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.

INVESTMENT POLICIES

Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

 

Reasons for buying our reports:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

• This report provides vital information on the product like its characteristics and segmentation

• This report helps you market and place the product correctly by identifying the target customer group of the product 

• This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

• The report provides a glimpse of government regulations applicable on the industry

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

• Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

• We use reliable sources of information and databases. And information from such sources is processed by us and included in the report


We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Sort by :
Stamp Pad & Pad Inks
Stamp Pad & Pad Inks

Inkpad or Stamp Pad is a small box which contains a pad of cloth or other material. It is impregnated with ink (the pad is inky). A marker is press... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Coloured Flame & Perfumed Candles
Coloured Flame & Perfumed Candles

Scented candles refer to the candles that have artificial/synthetic or natural fragrance material mixed into the wax emitting pleasant smell while ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
IV  Fluids
IV Fluids

I.V. Fluids

Intravenous fluids are fluid... Read More

Capacity :
14,400,000 Bottles/annum
Plant and Machinery cost:
476.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
53.00 %
TCI :
0.00 Lakhs
Cost of Project :
1092.00Lakhs
Add To Inquiry Basket
Surgical Cotton
Surgical Cotton

Surgical cotton is also known as absorbent cotton” or “cotton wool”. Surgical/Absorbent cott... Read More

Capacity :
300,000 kgs/annum
Plant and Machinery cost:
69.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
57.00 %
TCI :
0.00 Lakhs
Cost of Project :
238.00Lakhs
Add To Inquiry Basket
Disposable Products (Thermocol Plate Dona  Thali and Glass Paper Coffee and Pepsi Glass  Silver Coated Dona Plates and Spoons Plastic Glass and Spoon  Tissue Paper)
Disposable Products (Thermocol Plate Dona Thali and Glass Paper Coffee and Pepsi Glass Silver Coated Dona Plates and Spoons Plastic Glass and Spoon Tissue Paper)

Disposable cups, glasses, plates and spoons are used in daily life nowadays. In addition to be used at home these are large... Read More

Capacity :
Thermocol Plates : 15,000 Th. Nos/annum Thermocol Dona : 15,000 Th. Nos/annum Thermocol Thali
Plant and Machinery cost:
105.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
57.00 %
TCI :
0.00 Lakhs
Cost of Project :
405.00Lakhs
Add To Inquiry Basket
Fruit Juice in Aseptic Packaging
Fruit Juice in Aseptic Packaging

A freshly squeezed orange or fresh pulped and strained apple would supply a fruit juice drink for immediate consumption, bu... Read More

Capacity :
3,750,000 Ltrs. /annum
Plant and Machinery cost:
96.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
3.00%
Break Even Point (BEP):
85.00 %
TCI :
0.00 Lakhs
Cost of Project :
1144.00Lakhs
Add To Inquiry Basket
FRUIT JUICE (Apple, Plum and Peach)
FRUIT JUICE (Apple, Plum and Peach)

It could be said that freshly pressed fruit juice provides the truly natural answer to all the requirements of a soft drink... Read More

Capacity :
6,000,000 Ltrs. /annum
Plant and Machinery cost:
98.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
65.00 %
TCI :
0.00 Lakhs
Cost of Project :
565.00Lakhs
Add To Inquiry Basket
Baby Cereal Food
Baby Cereal Food

The Baby-cereal-foods is that enriched food which has a requisite level of nutrition. This requisite level is prescribed... Read More

Capacity :
600,000 Kgs/annum
Plant and Machinery cost:
35.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
32.00%
Break Even Point (BEP):
72.00 %
TCI :
0.00 Lakhs
Cost of Project :
82.00Lakhs
Add To Inquiry Basket
Potato Flakes and Pellets
Potato Flakes and Pellets

Indian vegetable basket is incomplete without mentioning the king of vegetables-potato-a sustaining force and a culinary... Read More

Capacity :
Potato Flakes : 600 MT/annum Potato Pellets : 600 MT/annum
Plant and Machinery cost:
140.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
50.00 %
TCI :
0.00 Lakhs
Cost of Project :
401.00Lakhs
Add To Inquiry Basket
Electrical Power Transformers (Repair & Refurbishment)
Electrical Power Transformers (Repair & Refurbishment)

Electrical Power Transformers (Repair & Refurbishment) 

 

Read More

Capacity :
Repairs of 25 MVA Power Transformers : 60 Nos/Annum Repairs of 50 MVA Power Transformers: 36 Nos/Ann
Plant and Machinery cost:
33.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
65.00 %
TCI :
0.00 Lakhs
Cost of Project :
200.00Lakhs
Add To Inquiry Basket
Essential Oil Extraction (Jasmine and Tuberose)
Essential Oil Extraction (Jasmine and Tuberose)

Essential oils, also called volatile odoriferous oil, are aromatic oily liquids extracted from different parts of plants, f... Read More

Capacity :
Jasmine Oil (5 ml Size Pack) : 750Ltrs/annum Tuberose Oil (5 ml Size Pack): 750Ltrs/annum
Plant and Machinery cost:
18.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
74.00 %
TCI :
0.00 Lakhs
Cost of Project :
42.00Lakhs
Add To Inquiry Basket
Phenolic Foam
Phenolic Foam

Phenolic foam is a dense, lightweight and porous material that can be cut into virtually any shape. It holds its shape when... Read More

Capacity :
3,600,000 Pcs/annum
Plant and Machinery cost:
69.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
47.00 %
TCI :
0.00 Lakhs
Cost of Project :
270.00Lakhs
Add To Inquiry Basket
Mango Pickles
Mango Pickles

Pickle is a general term used for fruits or vegetables preserved in vinegar or brine, usually with spices or sugar or both.... Read More

Capacity :
1,500,000 kgs/annum
Plant and Machinery cost:
50.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
54.00 %
TCI :
0.00 Lakhs
Cost of Project :
253.00Lakhs
Add To Inquiry Basket
Disposable Plastic Syringes
Disposable Plastic Syringes

Disposable Syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in steriliz... Read More

Capacity :
Disposable Plastic Syringes 2 ml Size : 350 Boxes/day Disposable Plastic Syringes 5 ml Size : 350 Bo
Plant and Machinery cost:
151.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
63.00 %
TCI :
0.00 Lakhs
Cost of Project :
343.00Lakhs
Add To Inquiry Basket
Hexamethoxymethyl Melamine (HMMM)
Hexamethoxymethyl Melamine (HMMM)

Hexamethoxymethyl Melamine (HMMM) HMMM is a Hexa (methoxymethyl) melamine resin. It is used as a crosslinking agent with re... Read More

Capacity :
6 M/Day
Plant and Machinery cost:
185.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
60.00 %
TCI :
0.00 Lakhs
Cost of Project :
600.00Lakhs
Add To Inquiry Basket
Spice Oil Extraction from Curry Leaves
Spice Oil Extraction from Curry Leaves

Spice Oil Extraction from Curry Leaves (100% EOU)

Murraya koenigii, commonly kno... Read More

Capacity :
500 Kgs. /Day
Plant and Machinery cost:
13.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
59.00 %
TCI :
0.00 Lakhs
Cost of Project :
152.00Lakhs
Add To Inquiry Basket
LV Control & Power Cables, MV Cables
LV Control & Power Cables, MV Cables

An electrical cable is an assembly of one or more wires running side by side or bundled, which is used to carry electric cu... Read More

Capacity :
LV Control 3x1.5 mm2 Copper (340 Kgs/KM) : 28 KMtrs. /Day Power Cables 7x1.5 mm2 Copper (350
Plant and Machinery cost:
162.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
53.00 %
TCI :
0.00 Lakhs
Cost of Project :
1147.00Lakhs
Add To Inquiry Basket
Pan Masala
Pan Masala

Pan Masala is a balanced mixture of betel leaf with lime, areca nut, clove, cardamom, mint, tobacco, essence and other ingredients. It is an agricu... Read More

Capacity :
Sada Pan Masala : 165 Kgs /Day Meetha Pan Masala : 165 Kgs /Day Zarda Pan Masala : 170 Kgs /Day
Plant and Machinery cost:
12.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
54.00 %
TCI :
0.00 Lakhs
Cost of Project :
191.00Lakhs
Add To Inquiry Basket
Paper Cups, Plates and Boxes
Paper Cups, Plates and Boxes

Paper cups and glasses are made in a variety of sizes and shapes according to the amount of material to be filled. They are... Read More

Capacity :
Paper Cups : 18,720,00 Pcs/annum Paper Plates : 21,600,000 Pcs/annum Corrugated Boxes : 1
Plant and Machinery cost:
46.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
30.00%
Break Even Point (BEP):
52.00 %
TCI :
0.00 Lakhs
Cost of Project :
292.00Lakhs
Add To Inquiry Basket
Sweat Free and Antibacterial Socks
Sweat Free and Antibacterial Socks

A sock is an item of clothing worn on the feet and often covering the ankle or some part of the calf. The foot is among the... Read More

Capacity :
450,000 Pairs/annum
Plant and Machinery cost:
42.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
66.00 %
TCI :
0.00 Lakhs
Cost of Project :
161.00Lakhs
Add To Inquiry Basket
Hydroponic Green House Farming
Hydroponic Green House Farming

Hydroponics is a system of agriculture that utilizes nutrient-laden water rather than soil for plant nourishment. The re-... Read More

Capacity :
Tomatoes: 800 MT/annum Peas: 36 MT/annum Cucumber : 56 MT/annum Beans : 80 MT/annum
Plant and Machinery cost:
23.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
489.00Lakhs
Add To Inquiry Basket
Soft Gelatin Capsules
Soft Gelatin Capsules

Soft gelatin (also called softgel or soft elastic) capsules consist of one piece hermetically-sealed soft shells. Soft gela... Read More

Capacity :
1,800,000 Th.Nos./annum
Plant and Machinery cost:
261.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
57.00 %
TCI :
0.00 Lakhs
Cost of Project :
478.00Lakhs
Add To Inquiry Basket
Paper Cups, Plates and Boxes
Paper Cups, Plates and Boxes

Paper cups and glasses are made in a variety of sizes and shapes according to the amount of material to be filled. They are... Read More

Capacity :
Paper Cups : 18,720,00 Pcs/annum Paper Plates : 21,600,000 Pcs/annum Corrugated Boxes : 1
Plant and Machinery cost:
46.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
30.00%
Break Even Point (BEP):
52.00 %
TCI :
0.00 Lakhs
Cost of Project :
292.00Lakhs
Add To Inquiry Basket
Vitamin ‘C’
Vitamin ‘C’

Vitamin C is a physiological antioxidant of major importance for protection against diseases and degenerative processes caused by... Read More

Capacity :
2400 MT/annum
Plant and Machinery cost:
123.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
50.00 %
TCI :
0.00 Lakhs
Cost of Project :
563.00Lakhs
Add To Inquiry Basket
Aloe Vera Gel and Powder
Aloe Vera Gel and Powder

Aloe Vera Gel is one of the product prepared from aloe vera itself. Aloe vera Gel has very good medicine for external us... Read More

Capacity :
Aloevera Gel : 90,000 Kgs/annum Aloevera Powder : 15,000 Kgs/annum
Plant and Machinery cost:
42.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
49.00 %
TCI :
0.00 Lakhs
Cost of Project :
164.00Lakhs
Add To Inquiry Basket
Organic Dragon Fruit Farming
Organic Dragon Fruit Farming

Dragon Fruit stems are scandent (climbing habit), creeping, sprawling or clambering, and branch profusely. ... Read More

Capacity :
7200 Kgs/day
Plant and Machinery cost:
1316.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
133.00%
Break Even Point (BEP):
15.00 %
TCI :
0.00 Lakhs
Cost of Project :
3183.00Lakhs
Add To Inquiry Basket
Gypsum Plaster Board
Gypsum Plaster Board

Gypsum board, also known as “drywall” or “plaster board,” consists of a core of gyp... Read More

Capacity :
Gypsum Plaster Board (Size 2440x1220x12 mm) :10000 Sq.Mt./day
Plant and Machinery cost:
549.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
21.00%
Break Even Point (BEP):
57.00 %
TCI :
0.00 Lakhs
Cost of Project :
3188.00Lakhs
Add To Inquiry Basket
Biofertilizer
Biofertilizer

A bio fertilizer (also bio-fertilizer) is a substance which contains living microorganisms which, when applied to seeds, pl... Read More

Capacity :
5 TONS/day
Plant and Machinery cost:
29.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
36.00%
Break Even Point (BEP):
45.00 %
TCI :
0.00 Lakhs
Cost of Project :
119.00Lakhs
Add To Inquiry Basket
uPVC Profiles for Doors and Windows
uPVC Profiles for Doors and Windows

The uPVC profile is basically an extruded section of a mixture of PVC with certain additives to make it suitable for mak... Read More

Capacity :
8.3 MT/Day
Plant and Machinery cost:
126.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
57.00 %
TCI :
0.00 Lakhs
Cost of Project :
654.00Lakhs
Add To Inquiry Basket
Cotton Ball (Hospital and Cosmetic Use)
Cotton Ball (Hospital and Cosmetic Use)

A cotton ball is a ball of soft fiber that is primarily used for medical or cosmetic purposes, but can be used for other pu... Read More

Capacity :
1,200 Pkts/Day
Plant and Machinery cost:
43.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
72.00 %
TCI :
0.00 Lakhs
Cost of Project :
86.00Lakhs
Add To Inquiry Basket
Dental Materials (Alginate, GI Cement, Composite Resin and Polycarboxylate Cement)
Dental Materials (Alginate, GI Cement, Composite Resin and Polycarboxylate Cement)

A dental impression is a negative imprint of hard (teeth) and soft tissues in the mouth from which a positive reproduction ... Read More

Capacity :
Composite Resin Poly Carboxylate Cement (500 gms Pack) : 80 Packs/ Day Glass Ionomer Cement (
Plant and Machinery cost:
26.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
33.00%
Break Even Point (BEP):
75.00 %
TCI :
0.00 Lakhs
Cost of Project :
71.00Lakhs
Add To Inquiry Basket
PVC Wires and Cables
PVC Wires and Cables

An important part of this power system is the cable system that is used exclusively to carry power from the main substation... Read More

Capacity :
10 KMTRS/Day
Plant and Machinery cost:
90.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
50.00 %
TCI :
0.00 Lakhs
Cost of Project :
444.00Lakhs
Add To Inquiry Basket
Infrared Reflected (IR) Paint
Infrared Reflected (IR) Paint

The sun energy reaches Earth as UV, visible and infrared radiation. The last one is largely responsible for heat build-up.&... Read More

Capacity :
300 Ltrs. /Day
Plant and Machinery cost:
33.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
40.00 %
TCI :
0.00 Lakhs
Cost of Project :
196.00Lakhs
Add To Inquiry Basket
Repair & Refurbishment of Power Transformers
Repair & Refurbishment of Power Transformers

Transformer is a machine that transfers electrical energy from one electrical circuit to another without changing frequency by the principle of ele... Read More

Capacity :
Repairs of 25 MVA Power Transformers : 60 Nos/Annum Repairs of 50 MVA Power Transformers: 36 Nos/Ann
Plant and Machinery cost:
33.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
65.00 %
TCI :
200.00 Lakhs
Cost of Project :
200.00Lakhs
Add To Inquiry Basket
Industrial Safety Leather Shoes
Industrial Safety Leather Shoes

An Industrial Safety Leather Shoes steel-toe boot is a durable boot or shoe that has a protective reinforcement in the toe which protects the foot ... Read More

Capacity :
300,000 Pairs/Annum
Plant and Machinery cost:
90.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
73.00 %
TCI :
359.00 Lakhs
Cost of Project :
359.00Lakhs
Add To Inquiry Basket
Fruit Pulp ,Mango, Guava, Pomegranate, Papaya
Fruit Pulp ,Mango, Guava, Pomegranate, Papaya

Fruit pulp is prepared from selected varieties of fruits. Fully matured fruits are harvested and quickly transported to the fruit processing plant.... Read More

Capacity :
Mango Pulp : 1200 MT/Annum Guava Pulp: 1200 MT/Annum Pomegranate Pulp: 1200 MT/Annum Papaya Pulp: 12
Plant and Machinery cost:
66.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
70.00 %
TCI :
379.00 Lakhs
Cost of Project :
379.00Lakhs
Add To Inquiry Basket
Virgin Coconut Oil
Virgin Coconut Oil

Virgin coconut oil (VCO) is the pure... Read More

Capacity :
Virgin Coconut Oil (Packed in 1 Ltr Glass Bottle): 90,000Ltrs/Annum
Plant and Machinery cost:
63.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
21.00%
Break Even Point (BEP):
61.00 %
TCI :
195.00 Lakhs
Cost of Project :
195.00Lakhs
Add To Inquiry Basket
Atta, Maida, Suji& Wheat Bran (Roller Flour Mill)
Atta, Maida, Suji& Wheat Bran (Roller Flour Mill)

Around 800 large Flour Mills in the ... Read More

Capacity :
Maida: 16500 MT/annum Sooji : 9900 MT/annum Wheat Flour: 41400 MT/annum Bran: 14700 MT/annum
Plant and Machinery cost:
1648.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
56.00 %
TCI :
2660.00 Lakhs
Cost of Project :
2660.00Lakhs
Add To Inquiry Basket
Fulvic Acid
Fulvic Acid

Fulvic acid is a part of the humic s... Read More

Capacity :
1200MT/Annum
Plant and Machinery cost:
42.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
42.00 %
TCI :
160.00 Lakhs
Cost of Project :
160.00Lakhs
Add To Inquiry Basket
NAMKEEN (DALMOTTH, BHUJIA, CHANA CHUR, KHATTA MEETHA)
NAMKEEN (DALMOTTH, BHUJIA, CHANA CHUR, KHATTA MEETHA)

Dal Moth, Chanachur,Bhujia and khatt... Read More

Capacity :
300 Tonn/Annum
Plant and Machinery cost:
8.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
62.00 %
TCI :
81.00 Lakhs
Cost of Project :
81.00Lakhs
Add To Inquiry Basket
Extraction of Oil from Rajnigandha
Extraction of Oil from Rajnigandha

Essential oils, also called volatile odoriferous oil, are aromatic oily liquids extracted from different parts of plants, f... Read More

Capacity :
1500 Ltrs. /annum
Plant and Machinery cost:
17.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
72.00 %
TCI :
0.00 Lakhs
Cost of Project :
42.00Lakhs
Add To Inquiry Basket
LPG Cylinders (Domestic and Commercial)
LPG Cylinders (Domestic and Commercial)

LPG Cylinder is an essential item for filling liquefied petroleum gas used for cooking purpose. The body of LPG cylinder... Read More

Capacity :
LPG Cylinders (Domestic 14.2 Kgs Size) : 640 Nos. /Day LPG Cylinders (Commercial 19 Kgs Size)
Plant and Machinery cost:
88.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
33.00%
Break Even Point (BEP):
56.00 %
TCI :
0.00 Lakhs
Cost of Project :
392.00Lakhs
Add To Inquiry Basket
Power Transformer
Power Transformer

A transformer is a device that transfers electrical energy from one circuit to another through inductively coupled condu... Read More

Capacity :
Power Transformer (132/33 KV, 50 MVA Core Type Oil Cooled) : 50 Nos. /annum
Plant and Machinery cost:
224.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
42.00 %
TCI :
0.00 Lakhs
Cost of Project :
1043.00Lakhs
Add To Inquiry Basket
Nuts & Bolts (MS Fasteners)
Nuts & Bolts (MS Fasteners)

Nuts & Bolts (M.S. Fasteners)

A... Read More

Capacity :
Mild Steel/HT Bolts: 625 Kgs. /Day Mild Steel/HT Nuts : 125 Kgs. /Day
Plant and Machinery cost:
33.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
71.00 %
TCI :
0.00 Lakhs
Cost of Project :
54.00Lakhs
Add To Inquiry Basket
Nuts and Bolts (MS Fasteners)
Nuts and Bolts (MS Fasteners)

Nuts and Bolts (M.S. Fasteners)

A f... Read More

Capacity :
Mild Steel/HT Bolts: 625 Kgs. /Day Mild Steel/HT Nuts : 125 Kgs. /Day
Plant and Machinery cost:
33.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
71.00 %
TCI :
0.00 Lakhs
Cost of Project :
54.00Lakhs
Add To Inquiry Basket
Surgical Cotton
Surgical Cotton

Cotton is a soft, staple fiber that grows in a form known as a boll around the seeds of the cotton plant, as shrub native t... Read More

Capacity :
1300 Kgs/day
Plant and Machinery cost:
191.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
64.00 %
TCI :
0.00 Lakhs
Cost of Project :
278.00Lakhs
Add To Inquiry Basket
Medical College with Hospital (750 Bedded)
Medical College with Hospital (750 Bedded)

A medical college is meant to impart education of medical field to students to qualify them as doctors in different special... Read More

Capacity :
Medical College 500 Students & Hospital 750 Beded
Plant and Machinery cost:
2047.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
43.00%
Break Even Point (BEP):
42.00 %
TCI :
0.00 Lakhs
Cost of Project :
10747.00Lakhs
Add To Inquiry Basket
Wood Plastic Composite (WPC)
Wood Plastic Composite (WPC)

Wood-plastic composites (WPCs) are a product class that has been developing over the last 40 years resulting in increased applications and expanded... Read More

Capacity :
4800000 sq.ft.
Plant and Machinery cost:
146.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
56.00 %
TCI :
0.00 Lakhs
Cost of Project :
391.00Lakhs
Add To Inquiry Basket
Floral Foam
Floral Foam

Floral foam is a dense, lightweight and porous material that can be cut into virtually any shape. It holds its shape when w... Read More

Capacity :
3,600,000 Pcs/annum
Plant and Machinery cost:
69.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
47.00 %
TCI :
0.00 Lakhs
Cost of Project :
270.00Lakhs
Add To Inquiry Basket
Spices and Masala  Grinding, Blending and Packing
Spices and Masala Grinding, Blending and Packing

Spices are non-leafy parts (e.g. bud, fruit, seed, bark, rhizome, and bulb) of plants used as a flavoring or seasoning, alt... Read More

Capacity :
Chole Masala : 400,000 Kgs/annum Sambhar Masala: 400,000 Kgs/annum Garm Masala : 400,000 Kgs/annum
Plant and Machinery cost:
91.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
32.00%
Break Even Point (BEP):
39.00 %
TCI :
0.00 Lakhs
Cost of Project :
1004.00Lakhs
Add To Inquiry Basket
Wire Nail
Wire Nail

Wire nail is very well known item, as it is very common product, which is normally used in daily life. It is used for fa... Read More

Capacity :
Wire Nail : 369,600 Kgs/annum Wire Scrap : 34,800 Kgs/annum
Plant and Machinery cost:
11.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.00%
Break Even Point (BEP):
53.00 %
TCI :
0.00 Lakhs
Cost of Project :
59.00Lakhs
Add To Inquiry Basket
Precast RCC Sleeper  for  Railway Track
Precast RCC Sleeper for Railway Track

Earlier, wooden sleepers were used for laying the railway tracks but due to the depleting wooden resources and increasing c... Read More

Capacity :
120,000 Pcs/annum
Plant and Machinery cost:
1509.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
39.00 %
TCI :
0.00 Lakhs
Cost of Project :
1970.00Lakhs
Add To Inquiry Basket
Hydroponic Green House Farming
Hydroponic Green House Farming

Hydroponics is a system of agriculture that utilizes nutrient-laden water rather than soil for plant nourishment. The re-us... Read More

Capacity :
Tomatoes: 500 MT/annum Peas: 45MT/annum Cucumber: 70MT/annum
Plant and Machinery cost:
22.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
55.00 %
TCI :
0.00 Lakhs
Cost of Project :
188.00Lakhs
Add To Inquiry Basket
Precipitated Silica  from Rice Husk Ash
Precipitated Silica from Rice Husk Ash

Rice milling generates a byproduct known as husk. This surrounds the paddy grain. During milling of paddy about 78 % of weight is r... Read More

Capacity :
Precipitated Silica : 1200mt/annum Activated Carbon (by product) : 336mt/annum Sodium Carbonate
Plant and Machinery cost:
556.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
1200.00Lakhs
Add To Inquiry Basket
Sheet Metal Components for Automobiles
Sheet Metal Components for Automobiles

Sheet metal is simply metal formed into thin and flat pieces. It is one of the fundamental forms used in metal working, and... Read More

Capacity :
Auto Sheet Metal Components : 600MT/Annum Metal Scraps : 6MT/Annum
Plant and Machinery cost:
90.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
30.00%
Break Even Point (BEP):
64.00 %
TCI :
0.00 Lakhs
Cost of Project :
176.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Start a Production Of Com... Compressed Bio Gas 6 MT Per Day Spent Slurry as Manure 60 MT Per Day 27.00 522.00
Start Industry Of Craft B... Craft Beer (Bottles 650 ml Size) 3,847 Bottles per day Craft Beer (Al. Cans 500 ml Size) 5,000 Bot 27.00 2007.00
Setup plant of Acetate T... Acetate Tow 8 MT Per Day 29.00 1426.00
Setup Plant Of Titanium ... Titanium Dioxide 4 MT Per Day 27.00 1455.00
Setup Plant Of Lab Cultu... Lab Cultured Diamonds (1 Carat) 30 Carat Per Day 25.00 361.00
Start Lemon Processing Un... Lemon Juice Dry Powder 104 Kgs per day Lemon Peel Oil 40 Kgs per day Lemon Pectin 140 Kgs 25.00 314.00
Solar PV (Photovoltaic) G... Solar PV (Photovoltaic) Glass 90,000 MT Per Annum 28.00 4200.00
A Business Plan For Pea P... Pea Protein Isolate 2 MT Per Day Spent Pea for Cattle Feed by Product 8 MT Per Day 27.00 614.00
Setup Plant Of Acrylate... Acrylate Resins 10,000 MT Per Annum Acrylate Emulsions 10,000 MT Per Annum 30.00 2291.00
Start Latex Rubber Thread... Latex Rubber Thread 200 Kg. Per Day 26.00 412.00
Start Cosmetic Unit (Seru... - 36.00 1617.00
Pioneering Pea Protein Bu... 0 0.00 0.00
Start Production Of Silic... - 28.00 4716.00
A Business Plan for IV Fl... IV Fluids (500 ml Size Pack) 78,000 Packs Per Day 27.00 1263.00
Start Industry of Liquor ... Wine (750 ml Size) 4,000,000 Bottles per annum Whiskey (375 ml Size) 4,000,000 Bottles per annum B 28.00 1880.00
Setup Pharmaceutical Unit... - 37.00 35774.00
Start Industry with Serum... 0 0.00 0.00
Setup Unit Of Cement Plan... Cement Plant 40,000 Bags per Day 26.00 25200.00
A Business Plan for Steri... Sterial Water for Injection 500 ml Size Pack 20,000 Sachets Per Day 30.00 1234.00
Setup Plant Of Lead From ... Lead Ingot 30 MT Per Day 28.00 2231.00
A Business Plan Blood Col... - 28.00 2294.00
A Business Plan for Parac... Paracetamol Powder 7 MT Per Day 27.00 779.00
Start Manufacturing Busin... Baby Diapers (4 Pcs.) 84,000 Pkts Per Day Adult Diapers (4 Pcs.) 18,000 Pkts Per Day Sanitary 29.00 4201.00
Start Tissue Paper Manufa... Tissue Paper 20 MT Per Day 27.00 2101.00
Launching a Solar Panel ... Solar Panel 500 MW per annum 32.00 5353.00
Biodegradable Disposable ... - 27.00 2774.00
Setup Curcumin Extraction... Curcumin Powder 100 Kgs per day Turmeric Oil 47 Kgs per day Deoiled Turmeric 1,853 Kgs 28.00 491.00
Setup Active Pharmaceutic... Paracetamol 10,000 Kgs Per Day Azithromycin 10,000 Kgs Per Day Metformin 10,000 Kgs 33.00 5246.00
A Business Plan For Sanit... Sanitary Napkins 4,800 PKTS per day 27.00 84.00
Start Manufacturing Of Bl... - 32.00 985.00
12345678910...

Showing 1201 - 1260 of 2703 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

And before diversifying/venturing into any product, wish to study the following aspects of the identified product:
  • Good Present/Future Demand
  • Export-Import Market Potential
  • Raw Material & Manpower Availability
  • Project Costs and Payback Period

We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

Reasons for buying the report:
  • This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.
  • This report provides vital information on the product like its definition, characteristics and segmentation.
  • This report helps you market and place the product correctly by identifying the target customer group of the product.
  • This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.
  • The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.
The report contains all the data which will help an entrepreneur find answers to questions like:
  • Why I should invest in this project?
  • What will drive the growth of the product?
  • What are the costs involved?
  • What will be the market potential?

The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product. The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.

  • Our research reports broadly cover Indian markets, present analysis, outlook and forecast.
  • The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players.
  • We use reliable sources of information and databases. And information from such sources is processed by us and included in the report.

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

Introduction
  • Project Introduction
  • Project Objective and Strategy
  • Concise History of the Product
  • Properties
  • BIS (Bureau of Indian Standards) Provision & Specification
  • Uses & Applications
Market Study and Assessment
  • Current Indian Market Scenario
  • Present Market Demand and Supply
  • Estimated Future Market Demand and Forecast
  • Statistics of Import & Export
  • Names & Addresses of Existing Units (Present Players)
  • Market Opportunity
Raw Material
  • List of Raw Materials
  • Properties of Raw Materials
  • Prescribed Quality of Raw Materials
  • List of Suppliers and Manufacturers
Personnel (Manpower) Requirements
  • Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel
Plant and Machinery
  • List of Plant & Machinery
  • Miscellaneous Items
  • Appliances & Equipments
  • Laboratory Equipments & Accessories
  • Electrification
  • Electric Load & Water
  • Maintenance Cost
  • Sources of Plant & Machinery (Suppliers and Manufacturers)
Manufacturing Process and Formulations
  • Detailed Process of Manufacture with Formulation
  • Packaging Required
  • Process Flow Sheet Diagram
Infrastructure and Utilities
  • Project Location
  • Requirement of Land Area
  • Rates of the Land
  • Built Up Area
  • Construction Schedule
  • Plant Layout and Requirement of Utilities
Assumptions for Profitability workings
Plant Economics
Production Schedule
Land & Building
  • Factory Land & Building
  • Site Development Expenses
Plant & Machinery
  • Indigenous Machineries
  • Other Machineries (Miscellaneous, Laboratory etc.)
Other Fixed Assets
  • Furniture & Fixtures
  • Pre-operative and Preliminary Expenses
  • Technical Knowhow
  • Provision of Contingencies
Working Capital Requirement Per Month
  • Raw Material
  • Packing Material
  • Lab & ETP Chemical Cost
  • Consumable Store
Overheads Required Per Month And Per Annum
  • Utilities & Overheads (Power, Water and Fuel Expenses etc.)
  • Royalty and Other Charges
  • Selling and Distribution Expenses
Salary and Wages
Turnover Per Annum
Share Capital
  • Equity Capital
  • Preference Share Capital
Annexure 1:: Cost of Project and Means of Finance
Annexure 2:: Profitability and Net Cash Accruals
  • Revenue/Income/Realisation
  • Expenses/Cost of Products/Services/Items
  • Gross Profit
  • Financial Charges
  • Total Cost of Sales
  • Net Profit After Taxes
  • Net Cash Accruals
Annexure 3 :: Assessment of Working Capital requirements
  • Current Assets
  • Gross Working. Capital
  • Current Liabilities
  • Net Working Capital
  • Working Note for Calculation of Work-in-process
Annexure 4 :: Sources and Disposition of Funds
Annexure 5 :: Projected Balance Sheets
  • ROI (Average of Fixed Assets)
  • RONW (Average of Share Capital)
  • ROI (Average of Total Assets)
Annexure 6 :: Profitability ratios
  • D.S.C.R
  • Earnings Per Share (EPS)
  • Debt Equity Ratio
Annexure 7 :: Break-Even Analysis
  • Variable Cost & Expenses
  • Semi-Var./Semi-Fixed Exp.
  • Profit Volume Ratio (PVR)
  • Fixed Expenses / Cost
  • B.E.P
Annexure 8 to 11:: Sensitivity Analysis-Price/Volume
  • Resultant N.P.B.T
  • Resultant D.S.C.R
  • Resultant PV Ratio
  • Resultant DER
  • Resultant ROI
  • Resultant BEP
Annexure 12 :: Shareholding Pattern and Stake Status
  • Equity Capital
  • Preference Share Capital
Annexure 13 :: Quantitative Details-Output/Sales/Stocks
  • Determined Capacity P.A of Products/Services
  • Achievable Efficiency/Yield % of Products/Services/Items
  • Net Usable Load/Capacity of Products/Services/Items
  • Expected Sales/ Revenue/ Income of Products/ Services/ Items
Annexure 14 :: Product wise domestic Sales Realisation
Annexure 15 :: Total Raw Material Cost
Annexure 16 :: Raw Material Cost per unit
Annexure 17 :: Total Lab & ETP Chemical Cost
Annexure 18 :: Consumables, Store etc.,
Annexure 19 :: Packing Material Cost
Annexure 20 :: Packing Material Cost Per Unit
Annexure 21 :: Employees Expenses
Annexure 22 :: Fuel Expenses
Annexure 23 :: Power/Electricity Expenses
Annexure 24 :: Royalty & Other Charges
Annexure 25 :: Repairs & Maintenance Exp.
Annexure 26 :: Other Mfg. Expenses
Annexure 27 :: Administration Expenses
Annexure 28 :: Selling Expenses
Annexure 29 :: Depreciation Charges – as per Books (Total)
Annexure 30 :: Depreciation Charges – as per Books (P & M)
Annexure 31 :: Depreciation Charges - As per IT Act WDV (Total)
Annexure 32 :: Depreciation Charges - As per IT Act WDV (P & M)
Annexure 33 :: Interest and Repayment - Term Loans
Annexure 34 :: Tax on Profits
Annexure 35 ::Projected Pay-Back Period And IRR