• 0

Project Consultancy, Reports & Profiles

Best Business Opportunities in Meghalaya - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

 

Meghalaya is a state in north-east India. The name means "the abode of clouds" in Sanskrit. As of 2011, the state has a population of 2,964,007 and is the 23rd most populous in the country. The population of Meghalaya as of 2014 is estimated to be 3,211,474. Meghalaya covers an area of approximately 22,430 square kilometers, with a length to breadth ratio of about 3:1

Meghalaya is predominantly an agrarian economy. Agriculture and allied activities engage nearly two-thirds of the total work force in Meghalaya. However, the contribution of this sector to the State's NSDP is only about one-third. Agriculture in the state is characterized by low productivity and unsustainable farm practices. Despite the large percentage of population engaged in agriculture, the state imports food from other Indian states.


TOURISM

 Meghalaya has some of the thickest surviving forests in the country and therefore constitutes one of the most important ecotourism circuit’s in India. The Meghalaya subtropical forests support a vast variety of flora and fauna. Meghalaya has 2 National Parks and 3 Wildlife Sanctuaries.   Meghalaya also offers many adventure tourism opportunities in the form of mountaineering, rock climbing, and trekking and hiking, water sports etc. The state offers several trekking routes, some of which also afford an opportunity to encounter rare animals such as slow loris, assorted deer and bear. The Umiam Lake has a water sports complex with facilities such as rowboats, paddleboats, sailing boats, cruise-boats, water-scooters and speedboats. Tourism in India is a growing industry, and as per World Tourism Organization predictions, India will be a leader in using tourism as an employment generator. The State of Meghalaya must be placed in a strategic position to take advantage of this growth.

“MEGHALAYA TOURISM DEVELOPMENT CORPORATION” has been set up for developing and promotion of Tourism in Meghalaya. The Corporation shall make efforts to increase its revenue to enable to carry out promotional activities. MTDC will organize package tours not only to Cherrapunjee but to other tourist destinations; organize training for guides, etc.

INDUSTRIAL SECTOR

The New Industrial & Investment Promotion Policy is designed to facilitate investments in new sectors across the State and thus ensure accelerated and sustained growth. The Policy focuses to attract, facilitate and promote wider expectations and high end investment.

There is an urgent need to promote investment in backward and difficult but resource rich areas. Therefore the policy provides additional incentives and support for such investments.


OBJECTIVE OF THE POLICY

•        To promote investment in all sectors

•        Generate employment opportunities for the local people in the industries and allied sectors.

•        To provide special incentives for promoting local Entrepreneurs in setting up of micro, small & medium manufacturing and service enterprises.

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage.

•        Achieve a balanced and growth oriented development covering the entire state through promotion of village and small scale industries.

•        Encourage need based development of local entrepreneurial skills through intensive motivation and training programmes at District, Sub-division and Block levels.

•        Provide guidance to prospective entrepreneurs by building up a data bank of project-profiles and other connected information. Special support to local entrepreneurs will be provided, and monitoring will be done to enable them to be successful.

•        Simplify rules and procedures by providing a single-window clearance facility for all investment proposals as applicable.

•        Promote Tourism, and make Meghalaya a tourist destination.

•        Promote IT as industries.

•        Promote first generation entrepreneurs. Government will encourage setting up of Entrepreneurship Development Institute by private or in PPP mode.

SALIENT FEATURES OF THE INDUSTRIAL POLICY

•        State Government believes in promoting private enterprises for speedy economic development of the State. The Government also stands committed to ensuring the healthy growth of existing industries. For this purpose, Government will ensure optimum number of industries by not permitting excess in any specific sector, thereby ensuring sustainability of existing business.

•        Enterprises promoted and managed by “Woman Entrepreneur”/physically challenged will get additional 10 % (ten percent) incentives on the State Capital Investment Subsidy.

•        Meghalaya has a long international border which needs immediate attention for development. To address this issue, 10 Kms towards the State from the International border is declared as “PRIORITY AREA” and enterprises set up within the 10 Kms area will be given special incentives to be known as “Border Area Subsidy”.

•        Government of Meghalaya recognizes:

1.       Hotels (not below two star category) and Amusement Parks.

2.       Medical and health services in the nature of nursing homes with a minimum capacity of 25 beds and Super – Specialty Health Care.

3.       Vocational training Institutes.


INDUSTRIES IDENTIFIED AS THRUST AREAS

                    Agro Based Industries :

   Horticulture – Based Units

   Biotechnology Based Units

   Medicinal Plants, Tea and Rubber

                       Animal Husbandry and Meat Processing Industries

         Development of Mineral based Industries:

      Coal-Based Industries

     Limestone Based Industries- Cement Plants, Lime Plants,

                      Calcium Carbide   Plants.

                       Electronics & Information Technology

INCENTIVES FOR LARGE AND MEDIUM SCALE INDUSTRIES

•        For large and medium scale industries, there are subsidies like capital investment subsidy, interest subsidy, power subsidy, subsidy on cost of pollution/quality-control measures, special subsidy for pioneer units in backward areas etc.

•        Exemption from the payment of applicable service tax for seven years to a "Tourism Unit"

•        Sales Tax exemption on sale of finished products for a period of seven years from the date of commercial production.

•        Reimbursement of Central Sales Tax (CST) paid on purchase of Capital Equipment installed till the date of project commissioning.

•        Partial exemption for applicable stamp duty.

INVESTMENT POLICIES

Meghalaya Government has always endeavored to set up the right kind of business climate to motivate investments in the State. In order to attract investment to the various sectors and thus contribute to the development of the economy as a whole.

The major being the industrial policy, which had been announced with a view to take advantage of the liberalized economic scenario in the country and also to keep pace with development in the national industrial sector are-

•        Generate employment opportunities for the local people in the industries and allied sectors

•        Develop human resources and bring about improvements in the quality of life by promoting industries in sectors where the state has comparative advantage. Create a conducive environment for industrial development by creation of the basic Infrastructural facilities and by setting up of industrial areas, growth centre and export promotion industrial park.

•        Provide preference to local Entrepreneurship in setting up of large, medium and small-scale units.

•        Promote local interests through joint ventures with external investors so as to facilitate technology transfer and capital flow by a package of suitable incentives.

•        Encourage setting up of export-oriented, Agro based, Mineral-based, Horticultural based and Electronic units as thrust area.

 

Reasons for buying our reports:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

• This report provides vital information on the product like its characteristics and segmentation

• This report helps you market and place the product correctly by identifying the target customer group of the product 

• This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

• The report provides a glimpse of government regulations applicable on the industry

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

• Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

• We use reliable sources of information and databases. And information from such sources is processed by us and included in the report


We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Sort by :
Start Production of Surgical Hand Gloves Rising Demand of Surgical Hand Gloves in Covid19 Pandemic
Start Production of Surgical Hand Gloves Rising Demand of Surgical Hand Gloves in Covid19 Pandemic

Medical gloves assist minim... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Opportunities in Business of Adhesive Fevicol Type
Opportunities in Business of Adhesive Fevicol Type

 

Adhesive, also kno... Read More

Capacity :
Adhesive (Fevicol Type) 10.0 MT per Day
Plant and Machinery cost:
17.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.70%
Break Even Point (BEP):
65.62 %
TCI :
0.00 Lakhs
Cost of Project :
161.00Lakhs
Add To Inquiry Basket
Start Manufacturing of Menthol Crystal
Start Manufacturing of Menthol Crystal

Menthol is a white crystalli... Read More

Capacity :
Menthol Crystal 1,000.0 Kgs per day Dmentha Oil 333.3 Kgs per day
Plant and Machinery cost:
196.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.87%
Break Even Point (BEP):
52.17 %
TCI :
0.00 Lakhs
Cost of Project :
643.00Lakhs
Add To Inquiry Basket
Paprika Oleoresin
Paprika Oleoresin

 

Paprika oleoresin... Read More

Capacity :
Paprika Oleoresin 160.0 Kgs Per Day Paprika Spent 1,093.3 Kgs Per Day
Plant and Machinery cost:
395.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.32%
Break Even Point (BEP):
57.23 %
TCI :
0.00 Lakhs
Cost of Project :
1700.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Business of PET Recycling &  Production of Flakes
Investment Opportunities in Business of PET Recycling & Production of Flakes

 

Municipal solid wa... Read More

Capacity :
Recycled PET Flakes 64.0 MT per day
Plant and Machinery cost:
174.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
30.45%
Break Even Point (BEP):
71.77 %
TCI :
0.00 Lakhs
Cost of Project :
440.00Lakhs
Add To Inquiry Basket
Emerging Business of  Xanthan Gum Food and Oil Drilling Grade
Emerging Business of Xanthan Gum Food and Oil Drilling Grade

 

Xanthan gum is a p... Read More

Capacity :
Xanthan Gum Food Grade 720.0 Kg. Per Day Xanthan Gum Oil Drilling Grade 340.0 Kg. Per Day
Plant and Machinery cost:
120.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.27%
Break Even Point (BEP):
61.77 %
TCI :
0.00 Lakhs
Cost of Project :
555.00Lakhs
Add To Inquiry Basket
Profitable Business of Industrial and Pharmaceutical Gases Start Oxygen Gas Plant Industrial and Pharmaceutical Grade
Profitable Business of Industrial and Pharmaceutical Gases Start Oxygen Gas Plant Industrial and Pharmaceutical Grade

Industrial gases are employ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Business Plan to Make Money from Lemon Grass Essential Oil Extraction
Business Plan to Make Money from Lemon Grass Essential Oil Extraction

Lemongrass oil (Cymbopogon ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Manufacturing Business of Marine Shipping Containers Cargo Container Profitable Production Business of Freight Shipping Containers for Money Making
Manufacturing Business of Marine Shipping Containers Cargo Container Profitable Production Business of Freight Shipping Containers for Money Making

Shipping containers have ch... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Production of Magnesium Stearate Best Business Ideas for investing in Chemical Industry
Investment Opportunities in Production of Magnesium Stearate Best Business Ideas for investing in Chemical Industry

 

At normal tempera... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Growing Business of Adhesive Fevicol Type Opportunities in Adhesives Industry
Growing Business of Adhesive Fevicol Type Opportunities in Adhesives Industry

 

Adhesives are a b... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Business of Blood Collection Bags
Business of Blood Collection Bags

Blood bag is a disposable bio-medical device used for collection, storage, transporta... Read More

Capacity :
Blood Collection Bags 10,000 Nos Per Day
Plant and Machinery cost:
167.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
58.00 %
TCI :
0.00 Lakhs
Cost of Project :
671.00Lakhs
Add To Inquiry Basket
Setup an Unsaturated Polyester Resin Plant
Setup an Unsaturated Polyester Resin Plant

 

Polyester resins ... Read More

Capacity :
Unsaturated Polyester Resin 5 MT Per Day
Plant and Machinery cost:
166.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
49.00 %
TCI :
0.00 Lakhs
Cost of Project :
485.00Lakhs
Add To Inquiry Basket
Production of Crumb Rubber Powder From Waste Tyres
Production of Crumb Rubber Powder From Waste Tyres

 

Crumb rubber is a... Read More

Capacity :
Crumb Rubber Powder 24 MT per day By Product Steel Wire 4.8 MT per day
Plant and Machinery cost:
115.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
66.00 %
TCI :
0.00 Lakhs
Cost of Project :
426.00Lakhs
Add To Inquiry Basket
Opportunities in Business of Disposable Plastic Syringes
Opportunities in Business of Disposable Plastic Syringes

 

Disposable Syring... Read More

Capacity :
Disposable Plastic Syringes with Needles 1 ml Size each Packed in Polypack: 62,500 Nos Per Day Dis
Plant and Machinery cost:
441.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
34.00%
Break Even Point (BEP):
40.00 %
TCI :
0.00 Lakhs
Cost of Project :
2149.00Lakhs
Add To Inquiry Basket
Production of Jute Fabric and Gunny Bags
Production of Jute Fabric and Gunny Bags
Jute is a natural fibre obtained from the bark of the white jute plant or the tossa jute plant. It is also known as the golden fibre owing to its gold... Read More
Capacity :
Jute Sacks (0.6 Kg each):100,000,000 Nos. / annum
Plant and Machinery cost:
1485.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
50.00 %
TCI :
0.00 Lakhs
Cost of Project :
5168.00Lakhs
Add To Inquiry Basket
Surgical & N95 Masks
Surgical & N95 Masks
A surgical mask, also known as a procedure mask, medical mask or simply as a face mask, is intended to be worn by health professionals during surgery ... Read More
Capacity :
3-Layer Surgical Face Masks (each Pkts = 25 Pcs.) :380 Pkts / day N95 Face Masks (each Pkts = 5 Pc
Plant and Machinery cost:
166.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.00%
Break Even Point (BEP):
66.00 %
TCI :
0.00 Lakhs
Cost of Project :
266.00Lakhs
Add To Inquiry Basket
Disposable Face Masks
Disposable Face Masks
A surgical mask, also known as a procedure mask, medical mask or simply as a face mask, is intended to be worn by health professionals during surgery ... Read More
Capacity :
Surgical Face Masks (each Pkts 25 Pcs.): 1,694 Pkts / day N95 Face Masks (each Pkts 5 Pcs.): 8,467 P
Plant and Machinery cost:
688.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
58.00 %
TCI :
0.00 Lakhs
Cost of Project :
1400.00Lakhs
Add To Inquiry Basket
Gunny (Jute) Bags from Fabric
Gunny (Jute) Bags from Fabric
Jute is a bio-degradable eco-friendly item. Prior to nineties, jute fabric was used for making low cost carry bags and gunny bags for packing rice, pa... Read More
Capacity :
Gunny (Jute) Bags: 25,000 Nos / day
Plant and Machinery cost:
81.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
61.00 %
TCI :
0.00 Lakhs
Cost of Project :
369.00Lakhs
Add To Inquiry Basket
Manufacturing of Gold and Diamond Jewellery
Manufacturing of Gold and Diamond Jewellery

 

Manufacturing of Gold and Diamond Jewellery. Opportunities for Entrepreneurs to Start Own Business o... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Aluminium Foil (Food Packaging and Pharmaceuticals Foils)
Aluminium Foil (Food Packaging and Pharmaceuticals Foils)

Aluminium plays a major role in the modern world through its innumerable forms of applications- from kitchenware... Read More

Capacity :
Food Packaging Grade Aluminium Foil :10.0 MT / day Pharmaceutical Grade Aluminium Foil : 10.0 MT /
Plant and Machinery cost:
1413.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
62.00 %
TCI :
0.00 Lakhs
Cost of Project :
2190.00Lakhs
Add To Inquiry Basket
Atmanirbhar Bharat Abhiyan (Self-Reliant India Mission)
Atmanirbhar Bharat Abhiyan (Self-Reliant India Mission)

 

Atmanirbhar Bharat Abhiyan (Self-Reliant ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Startup Opportunities in Active Pharma Ingredients
Startup Opportunities in Active Pharma Ingredients

 

Startup Opportunities in Active Pharma Ing... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Disposable Nitrile Gloves
Disposable Nitrile Gloves

Nitrile gloves are a type of disposable gloves made from synthetic rubber, this means there is no risk of latex allerg... Read More

Capacity :
Disposable Nitrile Gloves:100,000.0 Pcs. / day
Plant and Machinery cost:
632.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
57.00 %
TCI :
0.00 Lakhs
Cost of Project :
1239.00Lakhs
Add To Inquiry Basket
Production of A4 and A3 Size Paper.
Production of A4 and A3 Size Paper.

 

Production of A4 and A3 Size Paper. Profitable Investment in Copier Pap... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Disposable Nitrile Gloves (Powder Free)
Disposable Nitrile Gloves (Powder Free)

Nitrile gloves are a type of disposable gloves made from synthetic rubber, this means there is no risk of latex ... Read More

Capacity :
Disposable Nitrile Gloves (Powder Free): 500,000.0 Pcs. / day
Plant and Machinery cost:
1321.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
30.00%
Break Even Point (BEP):
45.00 %
TCI :
0.00 Lakhs
Cost of Project :
2925.00Lakhs
Add To Inquiry Basket
Production of Plastic Toys
Production of Plastic Toys

Production of Plastic Toys. Most Profitable Kids Toys Industry to Start.

Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Peanut Butter
Peanut Butter

Peanut butter is a food paste made from ground nut or peanut. It consists essentially of cleaned, graded, blanch... Read More

Capacity :
Peanut Butter: 8,000 Kgs / day
Plant and Machinery cost:
126.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
53.00 %
TCI :
0.00 Lakhs
Cost of Project :
562.00Lakhs
Add To Inquiry Basket
Refrigerant Gas R22 Bottling Plant
Refrigerant Gas R22 Bottling Plant

A refrigerant is a substance or mixture, usually a fluid, used in a heat pump and refrigeration cycle. In most c... Read More

Capacity :
Refrigerant Gas R22 (Cylinder 10 Kgs Size) : 166 Nos / day
Plant and Machinery cost:
24.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
64.00 %
TCI :
0.00 Lakhs
Cost of Project :
179.00Lakhs
Add To Inquiry Basket
Refrigerant Gas R22 Bottling Plant
Refrigerant Gas R22 Bottling Plant

Refrigerant Gas R22 Bottling Plant. Best Investment Opportunities in Industrial Gases. <... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Startup Business Opportunities in Holiday Resort (Three Star Grade)
Startup Business Opportunities in Holiday Resort (Three Star Grade)

Startup Business Opportunities in Holiday Resort (Three Star Grade). Investment Opportunities for Entrepreneurs ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Herbal Ayurvedic Hand Sanitizer
Herbal Ayurvedic Hand Sanitizer

 

Herbal/Ayurvedic <... Read More

Capacity :
Herbal/Ayurvedic Hand Sanitizer (100 ml Size each): 20,000 Bottles / day
Plant and Machinery cost:
14.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
36.00%
Break Even Point (BEP):
44.00 %
TCI :
0.00 Lakhs
Cost of Project :
357.00Lakhs
Add To Inquiry Basket
Cellophane Film Manufacturing Plant
Cellophane Film Manufacturing Plant

Cellophane Film Manufacturing Plant. Investment Opportunities in Cellophane Packaging Films Industry.

Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
API Production. Cephalexin, Ampicillin Trihydrate, Ibuprofen and Paracetamol
API Production. Cephalexin, Ampicillin Trihydrate, Ibuprofen and Paracetamol

API Production. Cephalexin, Ampicillin Trihydrate, Ibuprofen and Paracetamol. Production of Active ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Production of Fiberglass Transparent LPG Cylinders
Production of Fiberglass Transparent LPG Cylinders

A gas cylinder may be a pressure vessel for storage and containment of gases at above air pressure. High-pressur... Read More

Capacity :
Transparent LPG Cylinder: 2,243.6 Nos. / Day
Plant and Machinery cost:
28274.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.00%
Break Even Point (BEP):
27.00 %
TCI :
0.00 Lakhs
Cost of Project :
32012.00Lakhs
Add To Inquiry Basket
Production of IV Fluids (BFS Technology)
Production of IV Fluids (BFS Technology)

Intravenous fluids are fluids which are intended to be administered to a patient intravenously, directly through... Read More

Capacity :
IV Fluids (500 ml Pack): 22,400 Packs / Day IV Fluids (250 ml Pack): 22,400 Packs / Day
Plant and Machinery cost:
2505.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
42.00 %
TCI :
0.00 Lakhs
Cost of Project :
4334.00Lakhs
Add To Inquiry Basket
Alginate, GI Cement, Composite Resin & Polycarboxylate Cement (Dental Materials)
Alginate, GI Cement, Composite Resin & Polycarboxylate Cement (Dental Materials)

A dental impression may be a negative imprint of hard (teeth) and soft tissues within the mouth from which a positive reproduction (cast or model) ... Read More

Capacity :
Alginate (500 gms Packs) : 80 Packs / Day Glass Ionomer Cement (15 gms Packs with 10 gm Liquid) : 1,
Plant and Machinery cost:
56.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
31.00%
Break Even Point (BEP):
64.00 %
TCI :
0.00 Lakhs
Cost of Project :
212.00Lakhs
Add To Inquiry Basket
Production of Hot Melt Glue Stick
Production of Hot Melt Glue Stick

Thermoplastic adhesives, also called "hot melt" adhesives, applied hot and easily allowed to harden. These adhesives b... Read More

Capacity :
Clear Transparant Glue Stick Size 200 mmx 7 mm (LxD):2,000 Kgs / Day Yellow Glue Stick Size 250 mmx
Plant and Machinery cost:
73.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
49.00 %
TCI :
0.00 Lakhs
Cost of Project :
687.00Lakhs
Add To Inquiry Basket
Nitrile NBR powder free medical gloves (Disposable Nitrile Gloves Manufacturing Plant)
Nitrile NBR powder free medical gloves (Disposable Nitrile Gloves Manufacturing Plant)

Nitrile gloves are a type of disposable gloves made of synthetic rubber, this suggests there's no risk of latex allergies. They the foremost popula... Read More

Capacity :
Disposable Nitrile Gloves: 100,000 Pcs. / Day
Plant and Machinery cost:
632.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
57.00 %
TCI :
0.00 Lakhs
Cost of Project :
1239.00Lakhs
Add To Inquiry Basket
Active Zinc Oxide Production from Zinc Ash, Secondary Zinc Waste & EAF Dust
Active Zinc Oxide Production from Zinc Ash, Secondary Zinc Waste & EAF Dust

Active Zinc Oxide Production from Zinc Ash, Secondary Zinc W... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Frozen Layer Paratha (Fried Dough Food- Flatbread Native to the Indian Subcontinent)
Frozen Layer Paratha (Fried Dough Food- Flatbread Native to the Indian Subcontinent)

Frozen Layer Paratha (Fried Dough Food- Flatbread Native to the Indian Subcontinent) Manufac... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Manufacturing of Curcumin (Curcuma longa)
Manufacturing of Curcumin (Curcuma longa)

Curcumin is that the main biologically active phytochemical compound of Turmeric. Molecular chemical formula of ... Read More

Capacity :
Curcumin Powder: 50 Kgs / Day Turmeric Oil : 20 Kgs / Day Deoiled Turmeric : 920 Kgs / Day
Plant and Machinery cost:
231.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
21.00%
Break Even Point (BEP):
48.00 %
TCI :
0.00 Lakhs
Cost of Project :
666.00Lakhs
Add To Inquiry Basket
Manufacturing of Red Iron Oxide (With Mining of Mineral Ore  Along with Processing and Beneficiation)
Manufacturing of Red Iron Oxide (With Mining of Mineral Ore Along with Processing and Beneficiation)

Iron (III) oxide or ferric oxide is that the inorganic compound with the formula Fe2O3. it's one in every of the... Read More

Capacity :
Red Iron Oxide : 4,000 MT / Day
Plant and Machinery cost:
1096.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
31.00%
Break Even Point (BEP):
50.00 %
TCI :
0.00 Lakhs
Cost of Project :
4391.00Lakhs
Add To Inquiry Basket
Tungsten Carbide Rod Manufacturing
Tungsten Carbide Rod Manufacturing

Tungsten carbide (WC) is an inorganic chemical compound containing equal parts of tungsten and carbon ... Read More

Capacity :
Tungsten Carbide Rod : 2 MT / Day
Plant and Machinery cost:
119.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
31.00%
Break Even Point (BEP):
59.00 %
TCI :
0.00 Lakhs
Cost of Project :
607.00Lakhs
Add To Inquiry Basket
Electronics (E-Waste, E-Scrap) Recycling Plant
Electronics (E-Waste, E-Scrap) Recycling Plant

 

Electronic wastes, "e-waste", "e-scrap", or "Waste Electrical and Electronic ... Read More

Capacity :
Plastic Granules : 470 Kgs / Day Glass Scrap : 353 Kgs / Day Copper Scrap: 294 Kgs / Day Precious Me
Plant and Machinery cost:
107.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
58.00 %
TCI :
0.00 Lakhs
Cost of Project :
336.00Lakhs
Add To Inquiry Basket
Manufacturing of IV Fluids (BFS Technology)
Manufacturing of IV Fluids (BFS Technology)

Fluids are given when someone's body fluid volume falls. There are a number of things w... Read More

Capacity :
IV Fluids (500 ml Size Pack): 146,748 Units / Day IV Fluids (100 ml Size Pack): 153,252 Units / Day
Plant and Machinery cost:
4099.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.00%
Break Even Point (BEP):
41.00 %
TCI :
0.00 Lakhs
Cost of Project :
5808.00Lakhs
Add To Inquiry Basket
Production of Toughened Glass (Toughened Safety Glass)
Production of Toughened Glass (Toughened Safety Glass)

Toughening may be a process where the glass is heated at high temperatures to f... Read More

Capacity :
Toughened Glass (Size of Sheet 8 ft x 12 ft.): 4,000 Sq. Ft. / Day
Plant and Machinery cost:
332.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
24.00%
Break Even Point (BEP):
46.00 %
TCI :
0.00 Lakhs
Cost of Project :
939.00Lakhs
Add To Inquiry Basket
Freeze Dried Products Manufacturing - Fruits & Vegetables (Dry Banana, Mango, Custurd Apple, Beetroot, Sapota, Dragon Fruit, Jamun and Green Peas)
Freeze Dried Products Manufacturing - Fruits & Vegetables (Dry Banana, Mango, Custurd Apple, Beetroot, Sapota, Dragon Fruit, Jamun and Green Peas)

Freeze-drying, technically referred to as Lyophilization, may be a process of sublimation where water m... Read More

Capacity :
Freeze Dried Raw Banana: 19 Kgs / Day Freeze Dried Mango: 19 Kgs / Day Freeze Dried Custurd Apple:
Plant and Machinery cost:
95.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
24.00%
Break Even Point (BEP):
60.00 %
TCI :
0.00 Lakhs
Cost of Project :
199.00Lakhs
Add To Inquiry Basket
Investment Opportunities in Eco-Friendly Bamboo Toothbrush
Investment Opportunities in Eco-Friendly Bamboo Toothbrush

 

The toothbrush is an oral hygiene instrument wont to clean the teeth, gums, and tongue. It consist... Read More

Capacity :
Bamboo Toothbrush: 3,000 Pcs / Day
Plant and Machinery cost:
54.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.00%
Break Even Point (BEP):
54.00 %
TCI :
0.00 Lakhs
Cost of Project :
183.00Lakhs
Add To Inquiry Basket
Production of Blood Collection Tubes (Vacutainer)
Production of Blood Collection Tubes (Vacutainer)

 

Production of Blood Collection Tubes (Vacuta... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Production of Freeze Dried Fruits & Vegetables
Production of Freeze Dried Fruits & Vegetables

Production of Freeze Dried Fruits & Vegetables (Dry Ban... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Business Plan for Baby Diaper (T-shape and Pull-up Pants)
Business Plan for Baby Diaper (T-shape and Pull-up Pants)

 

Diapers are primarily worn by children who are not yet potty trained and exp... Read More

Capacity :
Pull-up Baby Pant Single Diaper (4 Pcs/Pkt): 60000 Pkt/day T-shape Open Style Baby Diaper (4 Pcs/Pkt
Plant and Machinery cost:
2600.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
36.00 %
TCI :
0.00 Lakhs
Cost of Project :
4178.00Lakhs
Add To Inquiry Basket
Business plan for set up Multispeciality Hospital
Business plan for set up Multispeciality Hospital

 

A Multi-Speciality medical institution as a health care organization has ... Read More

Capacity :
100 bedded
Plant and Machinery cost:
13989.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
31.00 %
TCI :
0.00 Lakhs
Cost of Project :
38304.00Lakhs
Add To Inquiry Basket
How to Start a Production Unit for Intravenous (IV) Cannulas
How to Start a Production Unit for Intravenous (IV) Cannulas

 

How to Sta... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Vitamin C or Ascorbate Manufacturing Plant from Sorbitol
Vitamin C or Ascorbate Manufacturing Plant from Sorbitol

 


Vitamin C or Ascorbate Manufacturing Plant from Sorbitol. Profitable Business Opportunities f...
Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Manufacturing Business of Helmet
Manufacturing Business of Helmet

A motorcycle helmet (protective headgear) is a type of helmet ... Read More

Capacity :
1500 Nos. per day
Plant and Machinery cost:
230.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
30.00%
Break Even Point (BEP):
62.00 %
TCI :
0.00 Lakhs
Cost of Project :
680.00Lakhs
Add To Inquiry Basket
Emerging Investment Opportunities for Entrepreneurs in Cold Storage Business in India Scope in Refrigerated Storage and Warehousing Industry
Emerging Investment Opportunities for Entrepreneurs in Cold Storage Business in India Scope in Refrigerated Storage and Warehousing Industry

Introduction:

Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Business Plan for Startup Multispeciality Hospital Business Ideas with High Profits 100 Bedded Multispeciality Hospital Profitable Project for Investment in Healthcare Industry
Business Plan for Startup Multispeciality Hospital Business Ideas with High Profits 100 Bedded Multispeciality Hospital Profitable Project for Investment in Healthcare Industry

Introduction: Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
A Business Plan For Sanit... Sanitary Napkins 4,800 PKTS per day 27.00 84.00
Start Manufacturing Of Bl... - 32.00 985.00
Start Production Of Potat... Potato Flakes 2 MT Per Day 25.00 563.00
Setup Manufacturing Unit ... Saddle 7,000 Unit Per Day Pedals 10,000 Unit Per Day 31.00 575.00
Opportunity in Sodium Sul... Sodium Sulfide Flakes 10,000 MT Per Annum 30.00 1426.00
Business Plan for Lithium... - 29.00 812.00
Start Manufacturing Busin... Cargo Containers (Size 20 Feet) 34 Nos Per Day 29.00 1992.00
Start Cutting and Grindin... Cutting Disc Size: (115 mm x 1 mm) 2,000 Pcs Pr Day Grinding Disc (115 mm x 6 mm) 2,000 Pcs Pr Day 28.00 423.00
Mink Blankets Production - 27.00 6000.00
A Business Plan for Micro... Micronutrient Fortified Energy Dense Food 100 MT Per Day 28.00 3500.00
Start Business of Caustic... - 25.00 56500.00
Start Crumb Rubber Powder... Crumb Rubber Powder 10 MT Per Day By Product Steel Wire 2 MT Per Day 26.00 303.00
Start Rice Milling Plant - 28.00 824.00
Start Manufacturing of Wo... Wooden Pencils 69,444 Gross Per Day 28.00 2400.00
A Business Plan for Monoc... Monocrystalline Silicon Ingots 400 Kgs Per Day 28.00 555.00
A Business Plan for Fiber... Fiberglass Tape 24,000 Mtrs. Per Day 28.00 442.00
Setup Plant of Compressed... - 28.00 950.00
Start a Production Of Com... Compressed Bio Gas 6 MT Per Day Spent Slurry as Manure 60 MT Per Day 27.00 522.00
Start Industry Of Craft B... Craft Beer (Bottles 650 ml Size) 3,847 Bottles per day Craft Beer (Al. Cans 500 ml Size) 5,000 Bot 27.00 2007.00
Setup plant of Acetate T... Acetate Tow 8 MT Per Day 29.00 1426.00
Setup Plant Of Titanium ... Titanium Dioxide 4 MT Per Day 27.00 1455.00
Setup Plant Of Lab Cultu... Lab Cultured Diamonds (1 Carat) 30 Carat Per Day 25.00 361.00
Start Lemon Processing Un... Lemon Juice Dry Powder 104 Kgs per day Lemon Peel Oil 40 Kgs per day Lemon Pectin 140 Kgs 25.00 314.00
Solar PV (Photovoltaic) G... Solar PV (Photovoltaic) Glass 90,000 MT Per Annum 28.00 4200.00
A Business Plan For Pea P... Pea Protein Isolate 2 MT Per Day Spent Pea for Cattle Feed by Product 8 MT Per Day 27.00 614.00
Setup Plant Of Acrylate... Acrylate Resins 10,000 MT Per Annum Acrylate Emulsions 10,000 MT Per Annum 30.00 2291.00
Start Latex Rubber Thread... Latex Rubber Thread 200 Kg. Per Day 26.00 412.00
Start Cosmetic Unit (Seru... - 36.00 1617.00
Pioneering Pea Protein Bu... 0 0.00 0.00
Start Production Of Silic... - 28.00 4716.00
12345678910...

Showing 841 - 900 of 2703 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

And before diversifying/venturing into any product, wish to study the following aspects of the identified product:
  • Good Present/Future Demand
  • Export-Import Market Potential
  • Raw Material & Manpower Availability
  • Project Costs and Payback Period

We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

Reasons for buying the report:
  • This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.
  • This report provides vital information on the product like its definition, characteristics and segmentation.
  • This report helps you market and place the product correctly by identifying the target customer group of the product.
  • This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.
  • The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.
The report contains all the data which will help an entrepreneur find answers to questions like:
  • Why I should invest in this project?
  • What will drive the growth of the product?
  • What are the costs involved?
  • What will be the market potential?

The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product. The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.

  • Our research reports broadly cover Indian markets, present analysis, outlook and forecast.
  • The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players.
  • We use reliable sources of information and databases. And information from such sources is processed by us and included in the report.

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

Introduction
  • Project Introduction
  • Project Objective and Strategy
  • Concise History of the Product
  • Properties
  • BIS (Bureau of Indian Standards) Provision & Specification
  • Uses & Applications
Market Study and Assessment
  • Current Indian Market Scenario
  • Present Market Demand and Supply
  • Estimated Future Market Demand and Forecast
  • Statistics of Import & Export
  • Names & Addresses of Existing Units (Present Players)
  • Market Opportunity
Raw Material
  • List of Raw Materials
  • Properties of Raw Materials
  • Prescribed Quality of Raw Materials
  • List of Suppliers and Manufacturers
Personnel (Manpower) Requirements
  • Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel
Plant and Machinery
  • List of Plant & Machinery
  • Miscellaneous Items
  • Appliances & Equipments
  • Laboratory Equipments & Accessories
  • Electrification
  • Electric Load & Water
  • Maintenance Cost
  • Sources of Plant & Machinery (Suppliers and Manufacturers)
Manufacturing Process and Formulations
  • Detailed Process of Manufacture with Formulation
  • Packaging Required
  • Process Flow Sheet Diagram
Infrastructure and Utilities
  • Project Location
  • Requirement of Land Area
  • Rates of the Land
  • Built Up Area
  • Construction Schedule
  • Plant Layout and Requirement of Utilities
Assumptions for Profitability workings
Plant Economics
Production Schedule
Land & Building
  • Factory Land & Building
  • Site Development Expenses
Plant & Machinery
  • Indigenous Machineries
  • Other Machineries (Miscellaneous, Laboratory etc.)
Other Fixed Assets
  • Furniture & Fixtures
  • Pre-operative and Preliminary Expenses
  • Technical Knowhow
  • Provision of Contingencies
Working Capital Requirement Per Month
  • Raw Material
  • Packing Material
  • Lab & ETP Chemical Cost
  • Consumable Store
Overheads Required Per Month And Per Annum
  • Utilities & Overheads (Power, Water and Fuel Expenses etc.)
  • Royalty and Other Charges
  • Selling and Distribution Expenses
Salary and Wages
Turnover Per Annum
Share Capital
  • Equity Capital
  • Preference Share Capital
Annexure 1:: Cost of Project and Means of Finance
Annexure 2:: Profitability and Net Cash Accruals
  • Revenue/Income/Realisation
  • Expenses/Cost of Products/Services/Items
  • Gross Profit
  • Financial Charges
  • Total Cost of Sales
  • Net Profit After Taxes
  • Net Cash Accruals
Annexure 3 :: Assessment of Working Capital requirements
  • Current Assets
  • Gross Working. Capital
  • Current Liabilities
  • Net Working Capital
  • Working Note for Calculation of Work-in-process
Annexure 4 :: Sources and Disposition of Funds
Annexure 5 :: Projected Balance Sheets
  • ROI (Average of Fixed Assets)
  • RONW (Average of Share Capital)
  • ROI (Average of Total Assets)
Annexure 6 :: Profitability ratios
  • D.S.C.R
  • Earnings Per Share (EPS)
  • Debt Equity Ratio
Annexure 7 :: Break-Even Analysis
  • Variable Cost & Expenses
  • Semi-Var./Semi-Fixed Exp.
  • Profit Volume Ratio (PVR)
  • Fixed Expenses / Cost
  • B.E.P
Annexure 8 to 11:: Sensitivity Analysis-Price/Volume
  • Resultant N.P.B.T
  • Resultant D.S.C.R
  • Resultant PV Ratio
  • Resultant DER
  • Resultant ROI
  • Resultant BEP
Annexure 12 :: Shareholding Pattern and Stake Status
  • Equity Capital
  • Preference Share Capital
Annexure 13 :: Quantitative Details-Output/Sales/Stocks
  • Determined Capacity P.A of Products/Services
  • Achievable Efficiency/Yield % of Products/Services/Items
  • Net Usable Load/Capacity of Products/Services/Items
  • Expected Sales/ Revenue/ Income of Products/ Services/ Items
Annexure 14 :: Product wise domestic Sales Realisation
Annexure 15 :: Total Raw Material Cost
Annexure 16 :: Raw Material Cost per unit
Annexure 17 :: Total Lab & ETP Chemical Cost
Annexure 18 :: Consumables, Store etc.,
Annexure 19 :: Packing Material Cost
Annexure 20 :: Packing Material Cost Per Unit
Annexure 21 :: Employees Expenses
Annexure 22 :: Fuel Expenses
Annexure 23 :: Power/Electricity Expenses
Annexure 24 :: Royalty & Other Charges
Annexure 25 :: Repairs & Maintenance Exp.
Annexure 26 :: Other Mfg. Expenses
Annexure 27 :: Administration Expenses
Annexure 28 :: Selling Expenses
Annexure 29 :: Depreciation Charges – as per Books (Total)
Annexure 30 :: Depreciation Charges – as per Books (P & M)
Annexure 31 :: Depreciation Charges - As per IT Act WDV (Total)
Annexure 32 :: Depreciation Charges - As per IT Act WDV (P & M)
Annexure 33 :: Interest and Repayment - Term Loans
Annexure 34 :: Tax on Profits
Annexure 35 ::Projected Pay-Back Period And IRR